How to Put Fishing Line on a Closed Face Reel
How to Put Fishing Line on a Closed Face Reel:
A Fishing reel is an integral part of any Fishing Gears. A fishing reel is a cylindrical tool that gets attached to a fishing rod. The fishing reel gets primarily used for winding and stowing line. There are various types of fishing reels available in the market. The most common ones are the spinning reels, closed face reels, and baitcasting reels.
Closed face fishing reels are commonly known as the spincast reels. These reels are easy to handle and perfect for amateurs who want to try their hand at fishing. The fishing line is less likely to tangle and jam the reel, unlike baitcaster reels. The closed face reels use the same casting mechanism as the spinning reels.
The angler does not have to flip a bail or maintain a proper release timing. Spincast reels have a push button that helps in releasing the line. The spincast reel was first commercially introduced in 1949. The spincast reel got developed as an attempt to provide a solution to the backlash problem found in baitcasting reels’ design.
Spincast reels also reduce the line twist and snares that sometimes occur with a traditional spinning reel. The closed face reel has all the integral parts covered beneath the nose cone. The line comes out through a little hole also called eyelets in the cover. By pressing the push button on the back, during your forward cast, you use the reel. After the line peels out, you let go of the button that makes the reeling stop.
If you are using the closed face reel for the first time, you might want to know how to put fishing line on a closed face reel. Follow the step by step instructions given below for the in-depth understanding of the process.
Step by Step Guide on How to Put Fishing Line on a Closed Face Reel
Step 1: Identify the line capacity of the reel. Always check the line capacity of the reel mentioned on the top. Make sure you are putting the appropriate line on the reel. If we put an inappropriate line on the reel, it would make the line unmanageable and limit the casting distance.
Step 2: Lay your rod flat and open the cover off the reel. Unscrew the lid of the spincast reel and take it off. Some reels need unscrewing while others have a pin and a notch that will separate. There are also spincast reels that have a push button that automatically opens up the cover when pressed.
Step 3: Take the old line off the reel if any. You could also keep some part of the old line so that you can attach the new line for a long cast. You can use the old line as a backup.
Step 4: Tie the new line to the spool. Run the line coming from the end of the rod through the hole or eyelets in the cover. You can tie it up to the new line to the spool of the reel. You can run the line from the tip to the handle. Take the help of the rod guides if necessary. Pull it tightly after making an arbor knot. If you still have the old line as backing, tie both the lines back together with two clinch knots or a nail knot.
Step 5: Cover the reel back. Hold the line tight while putting the cover back on. While doing so, make sure to check that the line does not get pinched by the cover of the reel. After placing the lid back on, tightly pull the line.
Step 6: Reel the new line onto the reel. Lay the spool on the ground. Likewise, this step gets done to make sure the line comes off the spool well just as it goes on your reel. Moreover, this process safeguards from twisting the line. Carefully hold the line tight using one hand and start reeling the process of the new line onto the reel. In addition, maintain maximum tension on the line to make sure that the reel is tight. Also, there may arise various casting problems If the line is not tight. Overall, you should reel the line at a steady and gentle pace.
Step 7: Fill spool to 1/8 inch of the lid. In addition, do not put an excessive line on the reel. You should open the reel’s cover every 15-20 seconds to ensure the reel does not get overloaded with the line. The closed face reels hold less line than other types of reels. But make sure that you do not accidentally pinch the line when replacing it with a new one.
Step 8: Run the line and tie a lure using line guides. Using a proper line guide, you can tie on your choice of lure. Also, you are ready to go on a fishing adventure now. However, make sure that to hold the reel while casting. Holding the reel enables you to pinch the line between your fingers. This process also helps to keep the line tight as you reel in, especially if you are using a light lure. The light lure does not insert tension on the line.
Step 9: Eliminate tangles and twists from the line. Ensure that there is no twists and tangles on the line as you reel it in slowly. In addition, you could also lay the line on a flat surface or a floor and reel it back gently. Make sure that there are no obstacles at the end of the line. Overall, this is final step if you wonder how to Put Fishing Line on a Closed Face Reel.
Putting a fishing line correctly on the spool of a fishing reel ensures an efficient and hassle-free fishing experience. Likewise, the fishing adventure gets more pleasant as there are no twists, tangles, or snags. This step by step instruction guide helps you to put a fishing line on a closed face reel properly. Moreover, the steps are simple, and you should approach it one step at a time. By the end of it, you can successfully put a fishing line onto the closed face reel. Happy fishing!